RadioLink RC8X Instruction Manual page 51

(TS) indicates the Throttle Switch
The position of the switches on the transmitter, please refer to
Dir.: Indicate the direction of the buttons, normal and reverse can be selected. Tap the blue
select box to set "Nor." or "Rev.", the corresponding servo will display as +100 or -100.
Type: Self-lock or jog can be selected.
Self-loc: If set the button as a self-lock button, it can be used as a 2-position switch, press it
once to one position, and press it again to the other position.
Jog: If set the button as a jog button, the value will reach the maximum (or the minimum)
when pressing the button, and back to the original value when loosen. For example: if set the
"Dir." of the PS1 is "Nor." and the "Type" is jog, the servo value will reach +100 when
pressing the PS1 and the servo value will back to -100 when loosen.
50
RadioLink Electronic Limited
www.radiolink.com
1.2.5 Buttons Introduction