RadioLink RC8X Instruction Manual page 68

mode (Trigger) can set the ratio of trigger, the brake rate,
and select a switch to control neutral brake.
Reset: click Reset will make the value back to the
default number.
Back: click the button
button to return to the previous menu.
Forward 50: Brake 50: We regard the entire throttle
range as 100%. Set the ratio as Forward 50: Brake 50
means that both forward and brake are account for 50%,
and the brake is at the midpoint of the throttle range.
Release the throttle trigger will not brake, you must keep pull the throttle trigger to the brake
direction (goes through the midpoint) to brake.
Forward 70: Brake 30: We regard the entire throttle range as 100%. Set the ratio as Forward
70: Brake 30 means that the forward is account for 70% and the brake is only account 30% of the
throttle range. Release the throttle trigger will not brake, you must keep pull the throttle trigger
to the brake direction (goes through the new midpoint which reach to 70% of the entire throttle
range) to brake.
Forward 100: Brake 0: We regard the entire throttle range as 100%. Set the ratio as Forward
100: Brake 0 means that the forward is account for 100% and the brake are account for 0%,
release the throttle trigger and brake immediately. The car cannot go backwards if the Ratio
select Forward 100: Brake 0.
or short press the power
67
RadioLink Electronic Limited
www.radiolink.com