RadioLink RC8X Instruction Manual page 15

④ Slide the battery cover back onto the case.
Attention: if your RC8X have plug battery already, but still cannot turn on, please check
below:
① check if the AAA batteries have reverse polarity connection.
② check if the battery box has reverse polarity connection.
③ check if the LiPo battery has reverse polarity connection.
④ check if the AAA batteries have fully charged.
1.2.8.2 Turn on Transmitter
Long press HOME button about 1.5 seconds, the RC8X will shows Radiolink Logo, and the
welcome to Radiolink sound is emitted at the same time, the home page will display this
information as the picture below:
The current model name. There are 100 models in total can be select in Model select
1
menu. Make sure the model's name on the display is consistent with the actual model before
running. If the model's name is not consistent with the actual model, the movement of servo,
the steering gear's action, the neutral position setting will be wrong, it may be damaging the
car.
Receiver signal strength. Receiver signal strength will display on the top of the
2
transmitter screen after the transmitter bind success with the receiver.
The battery voltage of transmitter.
3
14
RadioLink Electronic Limited
www.radiolink.com