RadioLink RC8X Instruction Manual page 87

EXP curve: It is used to adjust the sensitivity of the direction wheel both in a neutral position
and ends.
Taking the center line of the EXP as the demarcation point, if set the steering curve type as
Quick EXP curve and the EXP rate is 100%, the steering acceleration is completed in the front
80% of the rudder amount range, thus achieving the effect that the first half of the rudder
amount changes faster than the second half. The slow EXP curve is the opposite.
Quick/Slow: +100 indicates the quick EXP rate, and -100 indicates the slow EXP rate.
The vertical cursor line moves in conjunction with the operation of the steering wheel.
EXP rate: the initial value of EXP rate is 0%, -100% to +100% can be selected. With the
change of this value, the sensitivity of left and right steering is adjusted in the same ratio.
86
RadioLink Electronic Limited
www.radiolink.com