Adjusting The Play Of The Brake Pedals; Bleeding The Brake System Of The Tractor - Zetor FORTERRA 95 Operator's Manual

ADJUSTING THE PLAY OF THE
BRAKE PEDALS
The proper play between the piston rod
of the brake pedals and the piston of the
main cylinder is 0.5 - 1.0 mm (3 - 6 mm
measured at the edge of the brake ped-
als with the pedals disconnected). Per-
form the adjustment with the pedals dis-
connected and after releasing the ad-
justment nut (1) that the piston rod is
screwed in.
ADJUSTMENT
F_02_204
BLEEDING THE BRAKE SYSTEM OF
THE TRACTOR
Do the bleeding with the pedals discon-
nected, for each wheel separately, as fol-
lows:
Note: When bleeding the hydraulic
brake circuits you must always de-
press one pedal (1) by 7.5
measured at the piston rod of the
main brake cylinder, which amounts
+0,2
to 3 mm at the adjustment screw
(2) and do the bleeding with the
other pedal. To maintain the proper
distance insert between the pedal
(1) and adjustment screw (2) a
gauge with
thickness, i.e. 3
C756
+0,5
mm,
the corresponding
+0,2
mm.
169