Zetor FORTERRA 95 Operator's Manual page 17

HITCHES
Check the condition of the hitching and
attachment systems of the tractor and
trailer.
PREVENTIVE DAILY MAINTENANCE
F18
AFTER WIRK
IMPLEMENTS AND
COOLER CLOGGING
After work with front implements:
− Check the connections of the external
hydraulic circuit of the control of the
front three-point hitch for leaks
Clogging of the coolers:
− Remove the side plate of the hood.
− Release and slide the cooler to the left
side of the tractor.
− Clean the front walls of the engine
(gearbox, air-conditioning condenser)
cooler with compressed air (blow air in
the direction from the engine).
− Remove residual dirt from the space
under the hood so that it should not be
suctioned again.
17
F_02_100
WITH FRONT TYRES AND WHEELS
IN CASE OF
Check the air pressure in the front and
rear tyres. Depending on the character
of work adjust the pressure to the
recommended
necessary retighten the bolts of the front
and rear wheels (the rim / disc and disc /
wheel shaft connection).
value. Check and
Never drive with loose wheel
bolts!
F_02_7
if