Zetor FORTERRA 95 Operator's Manual page 62

ENSURING FREE SPACE FOR THE
CARDAN SHAFT OF THE FRONT
DRIVING AXLE
When installing auxiliary units or
connecting implements
sure that around the Cardan shaft
of the front driving axle there is at
least 10mm free space all along
its length at any oscillation of the
axle.
If this principle is not observed,
there is a danger of damaging
the tractor and machine.
DRIVING OPERATION
F_02_40
STOPPING THE TRACTOR - PARKING
BRAKE
Under normal conditions stop the tractor
slowly. Shortly before stopping:
make 1. Depress the clutch pedal.
2. Shift the main gear shifting lever to the
neutral position.
3. After every stopping secure the tractor
against accidental movement with the
parking brake. Activation of the park-
ing brake is signalled by illumination of
the corresponding indicator on the
dashboard.
F_02_60
STOPPING THE ENGINE
After work of the tractor when the engine
was fully loaded, the engine must be left
to cool down.
1. Before stopping the engine reduce the
2. Move the manual throttle lever to the
3. Pull up the control of the engine stop-
4. After stopping the engine you can turn
62
engine speed to 800 - 1000 rpm and
let the engine run without loading for
approx. 5 minutes.
STOP position.
ping device and hold it in the ex-
tended position until the engine opera-
tion stops.
the key from position "I" to position
"0".
XF_02_186