Pcbs - Daikin CTKC15QVM4 Removal Procedure

PCBs

5. PCBs
Warning
Step
1. Remove the control PCB.
1 Remove the connector
[S26].
2 Release the harnesses
from the 3 hooks and
the slit.
3 Disconnect all the 5
terminals.
4 Release the earth/
ground wire (yellow/
green) from the slit and
the groove.
8
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Hook
Slit
Black White Red
Slit
Groove
Earth/ground
wire
(yellow/green)
[S26]
Hook
(R22066)
Earth/ground (yellow/green)
Earth/ground
(green)
(R22067)
(R22069)
Si041551EB
Points
[S26]: display/signal receiver
PCB
Earth/ground (green)
1 2 3
FRONT
Black Red
Earth/ground
White (yellow/green)
Removal Procedure
(R22265)