Daikin CTKC15QVM4 Removal Procedure page 19

Si041551EB
Step
2 Unfasten the 2 hooks
and remove the piping
fixture on the back of
the indoor unit.
3 Slightly pull out the
auxiliary piping.
4 Remove the 2 screws
on the left side and
unfasten the hook on
the rear side.
5 Unfasten the 2 hooks
on the right side and lift
up the indoor heat
exchanger.
Removal Procedure
Procedure
Back view
Piping fixture
Hook
Auxiliary piping
Hook
Indoor heat exchanger
(R24354)
(R21036)
(R21037)
When reassembling the
indoor heat exchanger,
make sure that the 2 hooks
are fastened.
Hook
Indoor Heat Exchanger
Points
Hook
(R22117)
17