Safety Warnings - Dolmar MS290.4U Original Instruction Manual

Vibration
The vibration total value (tri-axial vector sum) determined according to ISO22867:
Model
MS290.4U
MS290.4L
MS290.4LN
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
Symbols
You will note the following symbols when reading the
instructions manual.
Read instruction manual and follow the all
warnings and safety precautions!
Take particular care and attention!
Forbidden!
Emergency stop
Fuel (Gasoline)
Oil
Flying object hazard!
Protective gloves must be worn!
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended!
Wear protective helmet, eye and ear
protection!
Kickback!
Type
Nylon cutting head
Metal blade
Nylon cutting head
Metal blade
Nylon cutting head
Left hand
2
a (m/s ) Uncertainty K
hv eq
(m/s
3.9 1.1
3.6 1.0
4.3 1.2
4.4 0.9
4.6 1.1
Keep bystanders at least 15 m (50 ft) away.
15m(50 )
FT
Top permissible tool speed
Never use metal blade.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

SAFETY WARNINGS

Brushcutter safety warnings
WARNING:
instructions, illustrations and specifications pro-
vided with this machine. Failure to follow all instruc-
tions listed below may result in fire and/or serious
injury to the operator and/or bystanders.
General safety
1. First-time or inexperienced operators should
ask the dealer for training in the operation of
this machine. Never allow children, or people
unfamiliar with the instructions, to use the
machine.
It is recommended that you lend the machine
2.
only to people who have proven to be expe-
rienced. Always hand over the instruction
manual.
3 ENGLISH
Right hand
2
a (m/s ) Uncertainty K
hv eq
2
)
2.6
3.0
3.9
4.5
3.8
Read all safety warnings,
2
(m/s )
1.0
1.0
1.8
1.6
1.9