Rod Guide Assembly (Pushrods Only) - SPX CUES flexitrax Operation Manual

flexitrax™ flexiprobe™ Operation Manual
9 Maintenance and cleaning
9.1.3

Rod guide assembly (pushrods only)

Always make sure the rod guide is clean.
Check the rod guide assembly regularly to see if a replacement is needed. Spare rod guides can be
purchased and fitted by competent mechanical technicians using a screwdriver. Spare rods and various
components are available to purchase as repair kits.
Caution: If the rod wears through the rod guide, it will start to wear through the metal structure of the
coiler. Wear to the metal components can cause hazards for the operator (sharp edges or electrical
malfunction).
Fig. 9-1: Rod guides.
For servicing information, contact CUES Technical, see section 1.6. Or contact your CUES
representative.
www.cuesinc.com | 274