Quick Start - SPX CUES flexitrax Operation Manual

2 Quick Start

Note: This section provides quick start instructions for experienced users only. We recommend that
new users read this manual fully before proceeding.
Note: This section assumes that the controller battery is charged. For details about charging the
battery, see section
To get started with the relevant Inspection system, follow these steps:
540c flexiprobe™
1. Make sure the controller is powered off.
2. Important! Rewind the pushrod completely onto the reel.
3. Set up the controller:
a. (Optional) Mount the controller onto the reel using the supplied clamp; see section 0.
b. Connect the pushrod reel to the controller using the link cable (item 4 in Fig. 3-4).
4. Press the power button to switch on the controller.
The controller takes around 10 seconds to display the splash screen.
4.7.
flexitrax™ flexiprobe™ Operation Manual
www.cuesinc.com
2 Quick Start
| 27