Standby; Camera Controls - SPX CUES flexitrax Operation Manual

6.8.2

Standby

The pendant is enabled by pressing and holding the [STANDBY] key (top left). The 'ON' light will turn
green and the word 'pendant' will appear on the controller display.
The 'ON' indication light will turn red when inactive.
Note: To prevent accidental operation of the P350 system, the P350 controller is disabled whilst the
pendant is active. However, it is still possible to record.
6.8.3

Camera controls

PAN
Using these keys, the camera head can be moved left and right. This will depend upon the rotate
position of the camera. Note: On FW cameras, this is provided digitally instead.
ROTATE
Rotate camera clockwise and anti-clockwise.
ZOOM
Zoom in [+] or Zoom Out [-]. Note: On FW/PT cameras, this is provided digitally.
flexitrax™ flexiprobe™ Operation Manual
6 Operating the system
www.cuesinc.com | 184