Inclination Calibration - SPX CUES flexitrax Operation Manual

flexitrax™ flexiprobe™ Operation Manual
6 Operating the system
To export a separate folder with inclination related data and images (e.g. for use in other documents),
select 'Inclination data & images' from the preferred export option, see section 7.4.2.
6.13.8

Inclination calibration

For greater accuracy the user should calibrate the tractor's on-board inclinometer immediately prior to
the survey by selecting the 'Inclination calibration' option under the 'Equipment settings' menu. If the
system includes an elevator it is recommended that it be fully lowered during the calibration process and
also when capturing inclination data, see Fig. 6-28 Set inclination offset.
Follow the on screen instructions - this will automatically generate an Inclination offset value specific to
the setup and environment of the survey.
www.cuesinc.com | 210