Controller Settings - SPX CUES flexitrax Operation Manual

5.5.2

Controller settings

Use this menu to configure general Controller settings.
 Screen brightness: You can adjust the screen brightness to suit the current lighting conditions. Select the
setting. Then use the Up and Down buttons to adjust the brightness. Or you can use the
Note: If the battery level is low on your controller, reduce the brightness to save battery power.
 Menu scrolling wraps around: When enabled, this setting allows you to loop through all items in a menu
using only the Up button, or only the Down button. For example, when you get to the bottom of menu,
pressing the Down button will loop the cursor back to the top of the menu.
 Language; distance units; inclination units; keyboard layout: You can set up the controller for your
locale. For example, you can set the language for menus and buttons on the Controller screen and you
can show distance / inclination measurements in meters or feet / degrees or percentage.
If required, you can specify a different keyboard layout. Supported layouts include US, UK, German
(QWERTZ), Spanish and French (AZERTY).
 Date and time: To ensure that your reports, videos and photos are correctly timestamped, you can set
your time zone, your preferred date format (for example, DD/MM/YYYY or MM/DD/YYYY), and the current
date and time.
Note: The controller remembers the date, time and time zone, even if its battery is fully discharged.
You will not need to re-enter these details after setting up the controller for the first time.
flexitrax™ flexiprobe™ Operation Manual
5 System setup

arrow keys.
www.cuesinc.com | 115