5.2
Power on the Controller
Warning! The controller is not earthed. If system connects to any mains operated equipment, the
external equipment must be earthed in accordance with the manufacturer's instructions. Failure to earth
the attached equipment may result in potentially lethal electric shock.
To power on the Controller:
1. Open the two covers.
2. Press the power button to switch on the Controller
The
power LED on the handle is green when the Controller is powered on.
3. The controller takes around 10 seconds to display the splash screen:
-
When you power on the Controller for the first time, the setup wizard launches; continue to
-
When you power on the Controller on all subsequent occasions, the Controller first prompts you to
calibrate the reel; continue to
section
5.4.
flexitrax™ flexiprobe™ Operation Manual
(section
3.1.1).
5 System setup
section
5.3.
www.cuesinc.com
| 104