Screen Overlay Settings - SPX CUES flexitrax Operation Manual

5.5.3

Screen overlay settings

Use this menu to configure how the date & time and pushrod distance are shown on the screen and
overlaid on video recordings and photos. You cannot retrospectively change overlay settings in a video
after it has been recorded.
 All hide / show: This setting displays or hides the date & time and rod distance.
When this setting is enabled, this information is shown on the controller screen and on your
survey videos and photos. If this setting is disabled, this information is hidden.
 Date & time hide / show: This setting displays or hides the date & time
 Distance hide / show: This setting displays or hides the pushrod distance i.e. how far the rod is unwound
from the reel.
550c flexitrax™ only:-
 Pitch hide / show: This setting displays or hides the crawler pitch.
 Mimic hide / show: This setting displays or hides the Mimic OSD which indicates crawler speed and
steering angle, and the camera position.
 Mimic size: Choose between Normal and Small.
 Mimic location: This setting sets the position of the Mimic on your display.
flexitrax™ flexiprobe™ Operation Manual
5 System setup
www.cuesinc.com | 117