Charge The Battery Before Using The Controller - SPX CUES flexitrax Operation Manual

4.7.1

Charge the battery before using the controller

Warning! Use only the supplied battery charger (or optional vehicle charge lead). Do not plug any other
CUES connectors into the controller power socket.
You must fully charge the controller's internal battery before using the system for the first time. To
charge the battery:
1. Use the supplied mains adapter ('power brick') to connect the controller to the mains power supply. The
controller's power socket is on the main connection panel on the rear of the controller.
2. Allow 4 to 6 hours for the battery to be fully charged. While charging is underway, the
charge LED on the controller's handle is amber
3. When the battery is fully charged, the
home screen (section
Fig. 4-32: Power socket (1) on main connection panel
battery charge LED is green and the battery indicator on the
3.2) is also solid green.
(section 3.1.3).
Power socket
flexitrax™ flexiprobe™ Operation Manual
4 System assembly
battery
www.cuesinc.com | 99