Factory Reset - SPX CUES flexitrax Operation Manual

9.3

Factory reset

This section describes how to perform a factory reset. This will restore the controller to its original state,
erasing any configuration settings currently defined on the device. You must only perform a factory reset
if instructed to do so by CUES technical staff.
Follow these steps:
1. In the Home screen, press the
Choose Settings > Maintenance > Factory Reset.
When the controller restarts, a setup wizard launches automatically. The wizard comprises several menus
where you can set preferences and basic details.
Briefly, you will need to re-specify the language, the system date & time, the keyboard layout and
your preferred distance units (feet or meters). The wizard also prompts you for your company details;
the controller will use these details to personalize the title page of your survey reports.
For full details about the setup wizard see
Settings button (item 7 in
section 5.3.
flexitrax™ flexiprobe™ Operation Manual
9 Maintenance and cleaning
Fig. 3-7).
www.cuesinc.com | 276