Table of Contents
Advertisement
5.5.13
Company details
Use this screen to enter your company details and, if required, your company logo. The controller will
use these details to personalize the title page of your survey videos and reports.
After entering your company's details, you will not need to re-enter them unless you perform a
factory reset; see
To import a company logo, see
5.6
Import a company logo
You can import your company logo to personalize the controller splash screen (shown briefly on startup)
and the title page of exported survey reports.
Follow these steps:
1. Copy the logo image (PNG or JPG only) to a USB memory stick and attach the stick to the controller.
You can use any of the controller's USB ports.
Note: The image file must be smaller than 2MB.
2. In the Home screen, press the
3. Choose Settings > Company Details.
section
9.3.
section
5.6.
Settings button (item 7 in
flexitrax™ flexiprobe™ Operation Manual
Fig.
3-7).
5 System setup
www.cuesinc.com
| 146
Advertisement
Table of Contents
