Safety Precautions - SPX CUES flexitrax Operation Manual

Advanced digital video inspection systems
Table of Contents

Advertisement

Safety precautions

Electrical precautions
Warning: If the system connects to mains operated equipment, the external equipment must be
earthed in accordance with the manufacturer's instructions. Failure to comply with this may cause the
system to become live and a lethal hazard.
Warning: System components must not be connected or disconnected when the power is on. Do not
touch any connectors while the system is live
Warning! Always remove the fuse when the controller is transported by air!
Always ensure that cabling is properly connected.
Always switch the system on and off using the Controller power button and the Power Supply Unit
(PSU) on / off switch for 550c. The PSU is integrated within the Powered Drum (see
and separate from the Manual Drum (see
Make sure that video and power cables are not entangled in the drum or reel. Cable ties are
recommended and will not impede system performance.
The system requires a connection to a protective earth; if in doubt, consult a qualified electrician.
Electrical equipment is factory-tested for electrical safety. Routine inspection is recommended (and
section
3.4.3).
flexitrax™ flexiprobe™ Operation Manual
section
www.cuesinc.com
3.4.2)
| 8

Advertisement

Table of Contents
loading

Table of Contents