Connection Points, Terminals And O-Rings - SPX CUES flexitrax Operation Manual

flexitrax™ flexiprobe™ Operation Manual
9 Maintenance and cleaning
9.1.2

Connection points, terminals and O-rings

Caution: Do not use damaged, dirty or corroded components, including all terminal connections,
cables and O-rings.
Ensure that all terminals and connection points are clean and free of corrosion and debris before you
attempt to use this equipment. This particularly affects the link cable connections between the controller
and drum, and the connections between cable and crawler, between crawler and Lighthead (if used) and
between Lighthead and camera.
Check that any O-rings are clean, greased and not damaged. This particularly applies to the camera O-
rings. For example, use a silicon-based grease such as "Super Lube" on the O-rings only.
Do not apply grease or lubricant to any pogo pins or the slipring PCB. This particularly applies to the
connection behind the camera.
We recommend protecting all terminals with the supplied protective caps when the system is not in use.
www.cuesinc.com | 273