Quick Start - SPX CUES flexitrax C550c Operation Manual

2 Quick Start

Note: This section provides quick start instructions for experienced users only. We recommend that
new users read this manual fully before proceeding.
To get started with the C550c system, follow these steps:
1 Make sure the PSU, whether separate or part of the powered drum, and controller are both powered
off.
Note: This Quick Start section assumes that the controller battery is charged. For details about
charging the battery, see
2 Set up the controller:
a. (Optional) Mount the controller onto the drum using the supplied clamp.
b. Connect the drum to the controller using the link cable (item 4 on
c. Connect the drum to the down-hole equipment relevant to the survey required.
3 Turn the power switch on the PSU and press the power button on the controller to turn the system
on.
The controller takes around 15 seconds to display the first screen.
page 87.
C550c Operation Manual
2 Quick Start
page 31).
www.cuesinc.com | 24