Tools And Materials; Table 2.1 Tools And Materials; Table 2.2 Screw Details - SPX Radiodetection Pearpoint P571 Flexicoiler Operation Manual

2.

Tools and Materials

2.2.1 Tools and equipment
Table 2.1 lists the cleaning materials, lubricants, and general purpose tools required to prepare the
equipment. If additional special tools are required, these are called up in the relevant paragraph.

Table 2.1 Tools and Materials

Description
Cleaning kit containing:
In addition you will need:
2.2.2 Screw fasteners
Most of the screws that need to be adjusted or are used to secure equipment are of the socket head cap
screw type. Throughout this Section screws are referred to by their size not by the size of the wrench key
that fits them. The required size of key can be obtained from Table 2.2 below.
Screws must be tightened to the minimum torque indicated in this table. A conversion table from
Newton/meters to pounds/feet is given in section 6.3
If Loctite is required for locking screws it will be specifically mentioned in the text.

Table 2.2 Screw Details

Cleaning brush
Ambersil Ambertron spray
Ambersil 40 plus
Silicone grease
Anti static cleaning foam
Wrench key long series
Wrench key set (Ball end)
Posidriv screwdriver
Loctite
"Rubert" roughness gauge
Clean lint free cloths
ISO fastener Quality 8.8
Screw Size Wrench Key
M1.6
0.89mm AF
M2.5 1.27mm AF
M3 2.50mm AF
M4 3.00mm AF
M5 4.00mm AF
M6 5.00mm AF
M8 6.00mm AF
Part No
HT4003501
04/B20567575
12/B3502
12/B3506
12/B27101687
12/B24
04/B200009AFL
04/B2010999
See Table 2.2
Loctite Type
Torque
0.19 Nm 222
0.77 Nm 222
1.4 Nm 222
3.2 Nm 243
6.4 Nm 243
10.9 Nm 243
26.1 Nm 638
P571 flexicoiler Operation Manual 9