Table of Contents
Advertisement
INSTALLATION
OPTIONAL FULL SCREEN DOOR INSTALLATION
Note: A mantel defl ector may be installed to reduce the minimum mantel height.
Refer to minimum clearances in the installation manual.
If not installing the mantel defl ector - proceed to step 3.
1) Line up the mantel defl ector (tabs to the back) with the full screen frame
as shown below.
2) Bend all 3 tabs 90º to secure the defl ector to the top of the frame
. The tabs should be fl ush with the underside of the top lip of the back plate.
Top of backing
plate
3) Install the optional full screen to the unit by securing with 4 screws in
locations shown below.
38
All manuals and user guides at all-guides.com
4) Install the optional full screen doors onto the frame.
5) Install the supplied bracket in the center of the low lip on the unit base -
secure with 2 clips as shown below.
Bracket
L540E-2 / HZI540E-2 Direct Vent Gas Insert
Clip
Final Install
Advertisement
Table of Contents
