INSTALLATION
FULL SCREEN ARCH DOOR AND FRAME INSTALLATION
1) Remove glass door (refer to glass door removal in the manual).
2) Install 4 Phillips screws (supplied with packaging) to the inside
walls of the unit (see Diagram 1 for locations).
Do not tighten the screws - leave them loose for the next step.
3) Remove 2 screws from inside the fi rebox in the location shown below.
Diagram 2
Diagram 2a
56
Diagram 1
4) Slide bracket into slot on the back of the full screen door frame.
See diagram 3.
5) Lift screen doors off of door frame to reduce the weight during
installation.
Diagram 3
Diagram 3a
6) Mount the door frame onto 4 loosened screws from step 2 and retighten.
Note: The door frame is adjustable up by 3/4" to accommodate for
fi nished fl ooring.
The door frame can also be adjusted out 3/4" from the unit to
accommodate fi nishing materials. See Diagram 4.
Regency Bellavista™ B41XTE Gas Fireplace
Use these holes to
accommodate thicker
fi nishing materials (+3/4")
0"
+3/4"
Factory
Setting
+3/4"
Diagram 4