Safety Information; Alert Boxes; Warnings - Thermo Scientific ULTROpure 682 Series Operation Manual

Reverse osmosis system
Table of Contents

Advertisement

Alert Signals
Warning
Warnings alert you to a possibility of
personal injury.
Caution
Cautions alert you to a possibility of
damage to the equipment.
Note
Notes alert you to pertinent facts and
conditions.

Safety Information

Your Thermo Scientific Barnstead ULTROpure Reverse
Osmosis System has been designed with function, relia-
bility, and safety in mind. It is your responsibility to install
it in conformance with local electrical codes. For safe
operation, please pay attention to the alert signals
throughout the manual.

Warnings

Important
Water Purification technology employs one or more of
the following: Chemicals, electrical devices, mercury
vapor lamps, steam and heated vessels. Care should be
taken when installing, operating or servicing Barnstead
Products. Listed below are the specific safety notes per-
tinent to the Barnstead ULTROpure Reverse Osmosis
System.
To avoid electrical shock, always:
1.
Ensure that the equipment is connected to
electrical service according to local and
national electrical codes. Failure to properly
connect may create a fire or shock hazard.
2.
Do not mount the ULTROpure directly over
equipment that requires electrical service.
Routine maintenance of this unit may involve
water spillage and subsequent electrical
shock hazard if improperly located.
3.
For continued protection against possible haz-
ard, replace fuses with same type and rating
of fuse.
4.
Disconnect the ULTROpure and any equip-
ment serviced by the ULTROpure from the
power supply prior to maintenance and ser-
vicing.
To avoid personal Injury:
1.
This device is to be used only with water
feeds and specified pretreatment chemicals
determined by a Barnstead water analysis.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ultropure d6821Ultropure d6822Ultropure d6823

Table of Contents