Table of Contents
Advertisement
Thermo Scientific
Safety Information
Section 1
Your Thermo Scientific EASYpure® II has been designed with function,
reliability, and safety in mind. It is the user's responsibility to install it in
conformance with local electrical codes. For safe operation, pay attention
to Notes, Cautions, and Warnings throughout the manual.
This manual contains important operating and safety information. The
user must carefully read and understand the contents of this manual prior
to the use of this equipment.
Water purification technology employs one or more of the following:
chemicals, electrical devices, mercury vapor lamps, steam and heated
vessels. Care should be taken when installing, operating or servicing
Thermo Scientific products. Specific safety notes are listed below.
Warnings
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of correct voltage and current
handling capacity.
2. Do not locate your EASYpure II directly over equipment that requires
electrical service. Routine maintenance of this unit may involve water
spillage and subsequent electrical shock hazard, if improperly located.
3. Replace fuses only with the same type and rating of fuse.
4. Do not assemble water lines or remove cartridges where spilled water
could contact equipment that requires electrical service. Electrical
shock could result.
5. Disconnect from the power supply prior to maintenance and servicing.
EASYpure® II
1-1
Advertisement
Table of Contents
