Suzuki LT-A700X 2004 Service Manual page 369

8-66 CHASSIS
• Install the balls, rear brake cam shaft 6 and rear brake pres-
sure plate 7.
• When installing the rear brake pressure plate 7, align its
groove to the rear brake cam shaft 6.
• Apply grease to the rear brake camshaft 6.
+ 99000-25010: SUZUKI SUPER GREASE "A"
Measure the outer distance A between the steel plates as
shown.
If the distance A is less than the specification, reassemble the
rear brake plates using the new plate stopper 8.
% Outer distance A
Standard: 26.0 – 27.0 mm (1.06 – 1.07 in)
• Install the rear brake plates 9, alining the grooves of the
case.
• Install the new gasket 0.
• Install the rear brake case cover A.
• Apply thread lock to the rear brake case cover bolts.
• Tighten the bolts diagonally to the specified torque.
# Rear brake case cover bolt: 26 N·m (2.6 kgf-m, 19.0 lb-ft)
, 99000-32130: THREAD LOCK SUPER "1360"