Suzuki LT-A700X 2004 Service Manual page 108

• Install the rollers and pins.
#
To prevent damaging the oil seal lip from during
installation, slide the lip using a 0.1-mm steel sheet as
a guide.
• Install the spring seat by aligning the hole A with the hole B.
• Install the spring and spring plate by aligning the spring ends
with the holes.
• Compress the spring with the special tool.
% 09922-31430: Movable driven face spring compressor
• Tighten the movable driven face ring nut 1 temporarily.
• Remove the special tool from the movable driven face assem-
bly.
ENGINE 3-57