Suzuki LT-A700X 2004 Service Manual page 104

MOVABLE AND FIXED DRIVE FACE
Inspect the drive faces for any abnormal conditions such as
stepped wear or discoloration caused by burning.
If any damages are found, replace the drive faces with new
ones.
• Install the oil seal with the special tool.
% 09913-70210: Bearing install set (042)
REASSEMBLY
Reassemble the movable and fixed drive face in the reverse
order of disassembly. Pay attention to the following points:
• Apply a small amount of SUZUKI SUPER GREASE "A" to the
bore and oil seal lip.
. 99000-25030:SUZUKI SUPER GREASE "A" (USA)
99000-25010:SUZUKI SUPER GREASE "A" (Others)
#
* Wipe off any excess grease thoroughly.
* Take care not to apply grease to the contact surface
of the drive belt.
• Position the eight rollers 1 on the movable drive face.
• Mount the dampers 2 on the movable drive face plate 3.
• Position the movable drive face plate on the movable drive
face.
ENGINE 3-53