• Install the input shaft with the special tool.
% 09913-70210: Bearing installer set
• Install the new snap ring 1, new oil seal 2 and cap 3.
• Install the input shaft into the gear case with the special tool.
% 09913-70210: Bearing installer set
09924-74550: Final gear case oil seal installer
09922-21410: Long socket 46 mm
• Install the 2WD/4WD shifting fork 1, as shown in the photo-
graph.
• Apply front differential gear oil to the 2WD/4WD sifting fork
shaft 2.
• Install the shaft as shown in the photograph.
DRIVE TRAIN 4-11