6-10
FUEL SYSTEM AND THROTTLE BODY
THROTTLE BODY REMOVAL
• Remove the air cleaner box. ($3-4)
• Disconnect the fuel injector coupler 1.
• Place a rag under the fuel feed hose 2 and disconnect its
hose.
• Disconnect the TP sensor lead wire coupler 3.
• Disconnect the ISC lead wire coupler 4.
• Remove the throttle cable cover 5.
• Disconnect the throttle cabl from the drum.
#
After disconnecting the throttle cable, do not snap the
throttle valve from full open to full close. It may cause
damage to the throttle valve and throttle body.
• Loosen the throttle body clamp screw and remove the throttle
body assembly.