CRANKCASE BEARING INSPECTION
Rotate the bearing inner race by finger to inspect for abnormal
play, noise and smooth rotation while the bearings are in the
crankcase.
Replace the bearing in the following procedure if there is any-
thing unusual.
LEFT CRANKCASE BEARING REMOVAL
NOTE:
If there is no abnormal noise, the bearing removal is not neces-
sary.
• Remove the bearing retainers.
• Remove the bearing 1 with the special tool.
% 09921-20240: Bearing remover set (25 mm)
• Remove the bearings with the special tool.
% 09913-70210: Bearing installer set (2, 4, 5: 030)
LEFT CRANKCASE BEARING INSTALLATION
• Install the bearings with the special tool.
% 09913-70210: Bearing installer set (1: 052)
NOTE:
The stamped mark side of the bearing face outside.
(3, 7: 055)
(6: 040)
(2: 055)
(3, 4, 6: 040)
(5, 7: 075)
ENGINE
3-75
Play
Play