Advertisement
GreyT Elevator V3 - User Guide
(Rev 1)
Step 22
Install the #25H chain and chain tensioner. Either the Spartan #25 Chain Tensioner
(WCP-0051) or the #25 Chain Turnbuckle (WCP-0247) are compatible with this setup.
The recommended spot for the tensioner is within the green circles. Other locations may
be used as well.
After both tensioners have been added and aligned with each other, use the chain clamp
plate and four #4-40 bolts per side to attach chain to the chain mounting block. Two
additional 1/8" roll pins may be added per side as well. This addition will help reduce the
load on the #4-40 bolts.
Note: For information on how to install the chain tensioners, refer to the manual on
their product page�
Table of Contents
Page 33
wcproducts.com
Advertisement
