WCP GreyT Elevator V3 User Manual page 30

GreyT Elevator V3 - User Guide
(Rev 1)
Step 19
Slide the 1/2" ThunderHex shaft through the bearings and slide all components onto the
shaft as shown in the image below.
Use shaft collars to constrain the sprockets and shaft. Sprocket teeth should be aligned
with the chain pacer plate.
Note: A spacer may be added between the ThunderHex bearing and the sprocket to
help constrain it� Tape is also an acceptable substitute�
Table of Contents Page 30
wcproducts.com