WCP GreyT Elevator V3 User Manual page 14

GreyT Elevator V3 - User Guide
(Rev 1)
Step 3
Attach the Elevator Mast Cross Tube to the Elevator Mast Vertical Tubes using four
#10-32 bolts and 1" long spacers. The distance from the top of the main tube to the top
of the cross tube is determined by the Sprocket Mounting Plate installed in step 5. While
the tube can be lower, it is recommended to mount it as high as possible to increase the
strength of the elevator mast.
Table of Contents Page 14
wcproducts.com