WCP GreyT Elevator V3 User Manual page 23

GreyT Elevator V3 - User Guide
(Rev 1)
Step 12
Bolt the Carriage Vertical Tubes to the assembled Carriage Horizontal Tubes. The holes
in the vertical tubes must be drilled clearance for #10-32 bolts with the outside face
drilled to 3/8", similar to how the Elevator Base Tube is done. When assembled, the
#10-32 x 3/8"L bolts should sit inside the Carriage Vertical Tube.
Table of Contents Page 23
wcproducts.com