WCP GreyT Elevator V3 User Manual page 32

GreyT Elevator V3 - User Guide
(Rev 1)
Step 21 - 775Pro Version
Before installing power transmission components, use the motor mount plate as a jig
to drill the desired holes. Use the lower images as a reference as to where to place the
motor mount plate. The unmarked holes are for the Elevator Mast Vertical Tubes, and
can be used to help line up the mounting plate.
Bolt the VersaPlanetaries onto the motor mount plate. These may be bolted on before
the ThunderHex shaft, sprockets, and collars are installed.
Install the rest of the components.
Be sure to align the sprocket teeth with the Chain Spacer Plate.
Table of Contents Page 32
wcproducts.com