Seaga JDL-2 COMBO Service And Parts Manual page 37

1. Press Service Mode Button
2. Press 5 for Options Menu
3. Press 5 for Fast Change Menu
4. Press 5 to toggle between ON and OFF
5. Press # to save changes
6. Press * to exit to previous menu
OPTICAL VEND
Note: Not used on this model.
POINT OF SALE MESSAGE (POS)
Turns ON or OFF the default scrolling display message.
1. Press Service Mode Button
2. Press 5 for Options Menu
3. Press 7 for POS Options
4. Press 1 for POS Message
5. Press 1 to Edit/Toggle between ON/OFF
6. Press # to save changes
7. Press * to exit to previous menu
8. Press 2 for Show Opt Out
9. Press 2 to Edit/Toggle between ON/OFF
10. Press # to save changes
11. Press * to exit to previous menu
12. Press 3 for Time Display
13. Press 3 to Edit/Toggle between ON/OFF
14. Press # to save changes
15. Press * to exit to previous menu
16. Press 4 for Programmable POS
17. Press 4 to Edit/Toggle between ON/OFF
18. Press # to save changes
19. Press * to exit to previous menu
20. Press 5 for Date
21. Press 5 to Edit/Toggle between MM/DD/YYYY and DD/MM/YYYY
22. Press # to save changes
23. Press * to exit to previous menu
24. Press 6 for Time
25. Press 6 to Edit/Toggle between AM/PM and 24hr
26. Press # to save changes
27. Press * to exit to previous menu
SET POINT
Displays the factory default Set Point temperature for each machine type. See Temp section for the
specific machine refrigeration modes. Ambient snack machines without a refrigeration system will display
39ºF.
These temperatures may be adjusted; however, it is not advised without direction by Seaga Customer
Care or an authorized technician. The optimal temperatures have been set according to NAMA
specifications for optimal product safety.
JDL V1.0 8 2022 37