Operation Manual / Power2 340-H / Low-pressure stage
15 Gas piping (option) / 15.4 Storage and disposal
15.4
Storage and disposal
Storing gas piping
The bellows of the gas piping are made of rustproof chromium-nickel steel and can be
stored in their undamaged original packaging for an unlimited time.
They must be stored in such a way that mechanical damage to the parts can be excluded.
See chapter
Storage of new low-pressure and high-pressure stages
Disposing of gas piping components
See chapter
Material and Disposal
15.5
Spare parts
15.5.1
Ordering spare parts
Please quote the following data when making queries and ordering spare parts:
¡
Serial number of Power2 (HT......)
¡
Serial number of the low or high-pressure stage (PT......)
¡
Designation and part number.
Spare parts can be ordered from a Turbo Systems service station.
If different model variants are not taken into account in this document, contact a Turbo
u
Systems service station.
CAUTION
Spare part storage
All spare parts that were ordered together with the low-pressure and/or
high-pressure stage must be kept intact and ready for use.
Carefully clean any rusted parts and grease them.
u
Dispose of replaced parts and parts that are not reusable in a professional and environ-
u
mentally compatible manner.
© Copyright 2022 ABB. All rights reserved.
→98.
HZTL4053_EN
→12.
Rev.F
March 2022