Removing The Air Inlets; Fig. 23: Removing The Air Inlets - ABB PT003888 Operation Manual

Operation Manual / Power2 340-H / Low-pressure stage
9 Disassembly and assembly / 9.5 Removing the air inlets
9.5

Removing the air inlets

Mark the casing position for assembly.
u
Fig. 23: Removing the air inlets
1. Attach lifting gear to the filter silencer (81000) or air suction branch (82000).
2. Loosen and remove V-clamp (72020).
3. Remove filter silencer (81000) or air suction branch (82000), set it down properly in an
appropriate place and secure it.
4. Remove and dispose of the O-ring (81010 / 82010).
© Copyright 2022 ABB. All rights reserved. HZTL4053_EN Rev.F March 2022