Installing The Gas Outlet Casing; Fig. 43: Installing The Gas Outlet Casing; Table 50: Tightening Torques (51009, 61003) - ABB PT003888 Operation Manual

Operation Manual / Power2 340-H / Low-pressure stage
9 Disassembly and assembly / 9.20 Installing the gas outlet casing
9.20

Installing the gas outlet casing

Fig. 43: Installing the gas outlet casing
Product
Power2 340-LP
Power2 340-LP
Table 50: Tightening torques (51009, 61003)
1. Insert a new gasket (61002) into the gas outlet casing (61001).
2. Coat thread of studs with high-temperature grease.
3. Attach the lifting gear to the gas outlet casing (61001) and position the gas outlet casing
in the correct position on the turbine casing (51000).
4. Fit the washers (51004) and hexagon nuts (51009). Observe tightening torque.
5. Fit support (61300) with washer (61004) and screw (61003).
6. Tighten screw (61003).
© Copyright 2022 ABB. All rights reserved.
Part number
51009
61003
HZTL4053_EN
Tightening torque
M12
65 Nm
M20
320 Nm
Rev.F March 2022