Hazards During Operation And Maintenance - ABB PT003888 Operation Manual

Table of Contents

Advertisement

Operation Manual / Power2 340-H / Low-pressure stage
2 Safety / 2.12 Hazards during operation and maintenance
2.12

Hazards during operation and maintenance

Noise hazards
The turbocharger's noise emission is influenced by its installation and operating conditions.
A noise level exceeding 85 dB(A) is harmful.
WARNING
Noise hazards
Exposure to noise can harm the hearing system, impair health and the psy-
chological state and may lead to lack of attention and irritation.
When the engine is running, always wear ear protection.
u
Always wear ear protection if the sound pressure level exceeds 85 dB(A).
u
Wear ear protection.
Hazards due to hot surfaces
Surfaces of the low-pressure and high-pressure stage, attached parts and operating fluids
(lubricating oil) get hot during operation. The surface temperature depends on the efficacy
of the existing insulation. The temperature may rise to a level that can cause burns.
WARNING
Danger of burns
Touching hot surfaces or contact with hot operating fluids can cause severe
burns.
Do not touch hot surfaces. Observe the warning plate on the low-pres-
u
sure and high-pressure stage.
Wear heat-resistant safety gloves and protective clothing.
u
Wait for the low-pressure and high-pressure stage to cool down before
u
carrying out any work.
Wear safety gloves to protect against thermal hazards.
© Copyright 2022 ABB. All rights reserved.
HZTL4053_EN
Rev.F
March 2022

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power2 340-h44

Table of Contents