Heating actuator 6-gang with controller
5
As-delivered state
In the as-delivered state, the device enables manual operation on the device itself,
provided that the voltage supply to the valve drives and the bus voltage are switched
on. With manual operation, no feedback telegrams are sent to the KNX.
In the as-delivered state, all the valve outputs are configured as follows:
–
Valve direction of action: Deenergised closed
–
Pulse width modulation on "Open valve": 50%
–
Cycle time: 20 minutes
–
Behaviour in case of bus voltage failure: Valves set to deenergised state
(valve outputs switched OFF)
–
Behaviour in case of bus voltage return: Valves set to deenergised state (valve
outputs switched OFF)
82406412
29.08.2022
10 / 17