Lattice Semiconductor MachXO2 User Manual page 40

MachXO2 and MachXO3 Starter Kit Evaluation Board User Guide
Evaluation Board User Guide
Ordering Information
Appendix B. Bill of Materials
Revision 1.2, March 2016
Section
Demonstration Design
MachXO3 Starter Kit
Appendix B. Bill of Materials
Revision 1.1, May 2015
Section
All
Technical Support Assistance
Revision 1.0, November 2014
Section
All
© 2014-2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
40
•
Changed the table caption for Table 7.7. MachXO2 and MachXO3 FPGA Interface
Reference from 'MachXO3 FPGA Interface Reference'.
•
Added description for the MachXO2 FPGA interface part number to Table 7.7. MachXO2
and MachXO3 FPGA Interface Reference.
•
Added the sentence ' When this power mode is used, the FTDI oscillator will be shut
off.' into Section 7.3.2. Applying External Power.
Added ordering information for the MachXO2 Starter Kit to Table 9.1. Ordering Information.
•
Modified item 39 in Appendix B Bill of Materials to add LCMXO2-4000ZE-1BG256C as
MFG Pin in the table.
•
Modified item 40 in Appendix B Bill of Materials to add On Semi and LE25U40CMDTWG
(later builds) as manufacturer and MFG Pin, respectively, in the table.
Change Summary
•
Indicated external Serial Flash Memory (SPAN-SION S25FL204K or S25FL208K).
•
Updated Run the Demonstration Design section. Corrected the link to the FTDI Chip
USB Hardware Drivers in the procedure for loading the FTDI chip USB hardware drivers
via the stand-alone package on a Windows system.
•
Updated Programming a Demo Design with the Lattice Diamond Programmer section.
Modified Device in step 10 of the procedure for programming MachXO3 device.
•
Updated Download Demo Designs section. Corrected links in the procedure for
downloading demo designs.
Updated Expansion Header Landings section. Revised Figure 7.4.
Header Landing and LED Array Callout to correct DIPSW ball callouts.
Modified item 40 Spansion MFG Pin in the table.
Change Summary
•
Changed document title to MachXO3 Starter Kit User Guide.
•
Changed instances of MachXO3L to MachXO3.
•
Indicated MachXO3L and/or MachXO3LF devices and board versions.
•
Indicated MachXO3 NVCM and/or Flash based devices.
Updated this section.
Change Summary
Initial release.
FPGA-EB-02036-1.4