Duplex Printing - Kyocera EcoPro EP C170N User Manual

Duplex Printing

ADVANCED OPERATION GUIDE
the installed optional paper feeders (from the top most paper cassette to
the bottom paper cassette):
MP tray
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassettes 2, 3 and 4 are available for selection when the optional paper
feeders are installed.
7
When the desired paper source is displayed, press [OK] ([ENTER]).
8 To exit the menu selection, press [MENU].
Using the optional duplexer, you can automatically print on both sides of
the paper. The duplexer is mounted underneath the printer.
Duplex printing is available for the following paper types:
Plain
Preprinted
Bond
Recycled
Rough
Letterhead
Color
Prepunched
High quality
Activating the duplexer is done by selecting either short edge or long edge
binding mode.
NOTE:
To use this function, the optional duplexer must be installed on
the printer.
Duplex printing can be also performed from the MP tray. When the MP
tray is set to First Mode (First), the paper size and paper type will be the
same as those of the paper cassette currently set at the paper feed
source. If the paper to be fed from the MP tray does not match the paper
size and paper type of the current paper feed source cassette, a paper
jam may occur.
Binding Modes
Binding refers to the manner in which printed pages of paper are joined
together (by gluing, stitching, etc.) in book form. The two possible types of
binding are: long-edge binding, in which pages are joined together along
their long edge; and short-edge binding, in which they are joined together
along their short edge. In selecting a binding type, you must also consider
Using the Operator Panel
2-67