Printer Resetting
ADVANCED OPERATION GUIDE
8
Once all data has been received, the message Waiting will appear.
Press [GO] to finish hex-dump printing.
The procedure described below resets the printer's temporary conditions,
such as the current page orientation, font, etc., set by commands to their
default values. Downloaded fonts and macros are deleted from the
printer's memory.
1
Press [MENU].
2
Press
or
repeatedly until Others >
appears.
3
Press
.
4
Press
or
repeatedly until >Restart
Printer appears.
5
To reset the printer, press [OK] ([ENTER]).
A question mark (?) appears.
6
Press [OK] ([ENTER]) again. Self test
appears while the printer is resetting itself,
followed by Please wait and then Ready.
Using the Operator Panel
Others
>Restart
Printer
>Restart
Printer?
Self test
Please wait
Ready
2-81
>