Kyocera EcoPro EP C170N User Manual page 43

ADVANCED OPERATION GUIDE
- Sleep time timeout time
- Formfeed timeout time
3
Memory
This item shows:
- Standard memory in the printer
- Option memory slot status (Slots 1 and 2) in kilobytes
- Total memory in the printer
- Current status of the RAM disk
4
Page Information
This item shows the page related items:
- Number of copies, from 1 to 999
- Total page count
5
Installed Options
This item shows the options installed in the printer:
- Hard disk
- Option ROM
- Memory card
6
Network Status
This item shows the IP address, subnet mask address, and
default gateway address for the network interface card in the
printer.
7
Emulation
This item shows all available emulations of the printer. The PCL 6
emulation is set as default when the printer is shipped from the
factory. The emulations are:
- PCL 6
- KPDL3
8
Error Log
This item shows the last three instances of the following types of
errors, listing them in the order of occurrence:
- KPDL (PostScript) errors
- Memory overflow
- Print overrun
- File-not-found
The most recent error is displayed on the topmost line of the Error
Log. Error information is cleared when the printer is powered off.
The error log information is intended for service use.
9
Consumable Status
This item shows the approximate level of remaining toner. When
the value is 100, the toner container is full. The closer to 0, the
smaller the amount of remaining toner.
10
Interface Information
This information shows the emulation and the default font for all
interfaces installed in the printer.
Using the Operator Panel
2-17