Kyocera EP 510DN Installation Manual

EP 510DN
Clearance
Left: 300 mm Right: 300 mm
(12 inches) (12 inches)
1
. Checking Shipped Components
Note
When lifting or moving the printer, pull up the 4 handles on both sides of the printer, then ALWAYS carry the printer with at least 4 people,
and another person to coordinate.
1
Unpacking
1
3
5
7 Remove the tapes.
Front Cover
3
. Loading Paper in the Paper Cassettes
1
Pull the paper cassette out.
Paper Cassette
4
Load paper.
The paper cassette will hold approximately 500 sheets of
pape r wit h 75 g/m (2 0 lb. ) to 80 g/m
2
weight.
Note
For details on paper usable with this machine, refer to the
Operation Guide (CD-ROM).
Rear: 100 mm Front: 1,000 mm
(4 inches) (40 inches)
2
4
6
MP Tray
2
Adjust the paper guides to fit the
paper size.
Paper Guides
Paper Size Adjusting Tab
(2 1 lb. ) basi s
2

Installation Guide

Note
Environment
Temperature: 10 to 32.5°C (50 to 90.5°F)
Humidity: 15 to 80%RH
WARNING Be sure to provide enough space around the printer. Prolonged use without
sufficient clearance may cause heat to build up inside the printer, resulting in
fire.
2
Shipped components
Paper Size Plates (4)
Printer
Toner Container
Waste Toner Box
3
Adjust the paper stopper to fit
the paper size.
5
Set the supplied paper size plate at the
front of the paper cassette.
Paper Size Plate
2
. Removing the lift
plate stoppers
1
Pull the paper cassette out.
CD-ROM
Paper Cassette
2
Remove the lift plate stopper
and attach it to the storage
Power Cord
location.
Installation Guide
(This sheet)
Paper Stopper
6
Push the paper cassette back until
it stops.
Lift Plate Stopper